• KSP to go®

Online Calculator help

Our KSP to go® Online Calculator allows you to calculate your inquiry quickly and easily .
All the input fields are mandatory. Without full input the calculation is not possible.

Tip 1 - Rotation of radiant panels for 90°:
The calculator always designs panels parallel to the entered room length.
If you do not want it like this or if it is not possible at the site, simply exchange the input values for length (L) and width (B)

Tip 2 - LED lighting:
The total number of LED lights can be calculated higher than needed in case of one-sided mounting, since the Box 10 contains 4 LED lights. All excess LED lights can be mounted at any time, as the package contains sufficient connection and mounting material.

Tip 3 - Heat loses:
We know that it is often difficult to correctly determine the required heating capacity.
Please understand that we can not make a calculation without this input.
Unfortunately we can not give you any simple calculation help here.
This value depends on too many factors (e.g., U-values, window surfaces, outside temperature, etc.).
There are calculators available on the internet, which can provide you reasonable results aftter the input of some relevant parameters.
However, you can safely use a value you would have used for wall radiators or air heaters. Our calculation program automatically takes into account the higher efficiency of radiant heating compared to convective heating systems.

Tip 4 - Printing of results and a shopping list:
You have the possibility to print your results and a shopping list in PDF format.
The prices listed in the shopping list are recommended end-user prices with and without VAT.
Please ask for your individual discount on these prices your wholesaler.

Tip 5 - Bids preparation:
If you have understand how to use the Calculator together with the shopping list, you will be able to straight on, quickly and professionally, answer the customers "How much it will cost?" question. The only thing you need to estimate are your assembly costs. But due to the simplicity and modular solution of KSP to go®, those costs are very low.

Tip 6 - Assembly costs:
Since we are often asked by our new customers for an estimation of the assembly costs, we have prepared a few examples to help you :

Example 1a: Mounting height up to 4 m, uncomplicated suspension, total length of radiant panels < 30 m : 60,00 €/m
Example 1b: Mounting height up to 4 m, uncomplicated suspension, total length of radiant panels >30 m but < 70 m : 55,00 €/m
Example 1c: Mounting height up to 4 m, uncomplicated suspension, total length of radiant panels > 70 m : 50,00 €/m

Example 2a: Mounting height up to 6 m, uncomplicated suspension, total length of radiant panels < 30 m : 65,00 €/m
Example 2b: Mounting height up to 6 m, uncomplicated suspension, total length of radiant panels >30 m but < 70 m : 60,00 €/m
Example 2c: Mounting height up to 6 m, uncomplicated suspension, total length of radiant panels > 70 m : 55,00 €/m

Example 3a: Mounting height > 6 m, uncomplicated suspension, total length of radiant panels < 30 m : 70,00 €/m
Example 3b: Mounting height > 6 m, uncomplicated suspension, total length of radiant panels > 30 m but < 70 m : 65,00 €/m
Example 3c: Mounting height > 6 m, uncomplicated suspension, total length of radiant panels > 70 m : 60,00 €/m

These assembly costs include average costs of suspensions, scaffolding or a lifting platform. Costs of connection piping, controls and heat sources are not included

Please, plan in some additional costs on material and work in case of complicated mounting conditions, such as difficult to reach ceiling, substructure of the ceiling or the need of a special dowel etc.

Important note:
This online calculator shall offer a fast and uncomplicated help. All calculation formulas were checked carefully and the result output was compared with manually calculated results. All results were always 100% correct.
Nevertheless, we can not completely exclude that this calculator gives incorrect results under certain input conditions, due to manipulation, or hacker attacks. Please understand that we can not assume any liability for the results and that the responsibility for the use of the software lies exclusively with the user.
In case of any suspicious implausible results we strongly recommend to check the technical data of the KSP to go®-products.

Cookies help with the provision of our services. With the use of our services are you agreeing that we use cookies.
More information Accept Reject